RPDC12-9-15

(1 customer review)

RemotePro 2.5W Continuous Remote Power System, 15W Solar Panel w/ Mount, 9Ah Battery,12V 20A PWM Solar Controller, Pole/Wall Mount Outdoor DieCast Aluminum Enclosure

Spec Sheet
User Guide

$259.95

80 in stock

  • Ships in 1-2 days
  • No Risk Guarantee
  • 2-3 Year Warranty

Features
• Complete Remote Power Solution for Off-Grid operation
• Weatherproof, UV resistant, outdoor enclosures
• Enclosures can be Wall or Pole Mounted
• High Performance Valve Regulated Sealed Lead Acid Batteries
• Advanced battery charge controller protects against overcharge and over discharge

Applications
• Wireless Base Stations and Clients
• Surveillance Cameras
• Wireless Bridge and Repeaters
• Remote Sensors
• Remote Lighting
• Backup Power Systems

The RPDC RemotePro series outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics.

The die cast aluminum enclosures are hinged and gasket sealed. They can be mounted to a pole or wall with the included mounting bracket system.

The high quality solar panels have a 25 year power output guarantee. They can be mounted to a pole or to a wall with the included bracket kit.

Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Enclosures are vented to prevent residual buildup of hydrogen gas.

Batteries are an Absorbed Glass Matt (AGM) type which have good all temperature performance.

Ship Weight 15.9 lbs
Ship Dimensions 15 × 13 × 7 in
Battery Voltage

Battery Capacity

Solar Capacity

Enclosure Type

Controller Type

Cont. Watts w/ 6 hrs Peak Sun

1 review for RPDC12-9-15

  1. Robert

    I am a pain when it comes to details so please dont take this like I am upset. The hardware for the solar panel mount is great. The stainless hardware has good thread lengths for a 2 pipe mount. The hardware for the box mount was not so good. The thread length was just barely long enough. Ideally if I was doing this I would have the same size nuts and adequate thread length for all three clamps. The Box mount could be better. If you are on a roof or a ladder having one tool is preferable to having to carry two different wrenches.

Add a review

Join Our Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.