2x USB IN,48V 12W OUT,Pasv PoE Inj

Features
• Remotely Power 48VDC Passive POE Equipment thru CAT5 Cable from USB power.
• A Must for Every Wireless Tech Tool Kit!
• Up to 12W Passive 48VDC POE Output Power
• Short Circuit, Over Current and Over Voltage Protection
• 10/100Mb Compatible
• I.T.E. Power Supply, UL Listed

Applications
• Troubleshooting Passive POE Wireless Systems
• Wireless Access Points and Client Devices
• IP Phone and Security Camera Systems

The TP-DCDC-2USB-48 Passive Power Over Ethernet Power Source offered by Tycon Power is a unique 48VDC Passive POE injector powered by two USB ports. They work by supplying power to the remote device on the 4 unused Ethernet pins 4,5(+) and 7,8(-). The Ethernet spec supports distances up to 100m (328 feet).

They have various protections for short circuit, overload, and overvoltage. The TP-DCDC-2USB-48 has an output power of up to 12W which is dependent on the capacity of the USB port that it is plugged into. USB2.0 ports are 0.5A and USB 3.0 ports are 0.9A. Newer USB ports provide up to 1.5A.

This USB powered POE injector is a must for any technician’s toolbox because it allows powering of IP-Phones and Cameras as well as other 48VDC POE products from a laptop’s USB ports. This allows the technician to quickly test the device by direct connection to his laptop, saving him a lot of time.

The TP-DCDC-2USB-48 can also be used in customer premise equipment to power external wireless gear from a customer’s computer USB ports, reducing wiring clutter at the PC and allowing the wireless gear to be powered down when the computer is powered down to conserve energy.

Dimensions: 85 x 76 x 36mm (3.4 x 3 x 1.4in)
Weight: 134g (4.7oz)