Features
· One (90W) 802.3bt PoE, Three (30W) 802.3at PoE and one (12W) 24V Passive PoE port
· Gigabit Compatible
· Built-in Surge Protection
· Automatic MDI/MDI-X Crossover
· Automatic Speed and Duplex Sensing
· Low Self Power and High Temperature Operation
· DIN Rail Adapters included
Applications
· Power different PoE devices from a single 48V supply
· Cameras and Wireless Radios
· PoE Lighting Applications
Description
The TP-SW5G-VERSABT Power over Ethernet (PoE) 5 Port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports. Port 1 is a 90W 4pair 802.3bt PoE port; Port 2,3,4 are 48V 30W 802.3at compatible ports; Port 5 is a 24V 12W Passive PoE port. This allows a customer to power up multiple PoE devices with different power requirements. The switch requires a 44-57VDC (4A) power input.
TP-SW5G-VERSABT
Ports
Port 1: 90W 4Pair 801.3bt PoE ; 1,2,4,5( V+), 3,6,7,8 (V-)
Port 2,3,4: 48V 30W 802.3at Mode B
Port 5: 24V 12W Passive PoE ; 4,5 (V+), 7,8 (V-)
Transmission Speed
1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
Connections
Shielded RJ45, Grounded to FG connection
Input
Vin 44VDC to 57VDC on Wire Terminal
LED’s
Right Hand LED: Gigabit Link (Green On), Activity (Green Blinking)
10/100Mb/s Link (Yellow On), Activity (Yellow Blinking)
Left Hand LED: PoE Power ON (Yellow On)
PoE Protections
Over Temperature, Over Current, Short Circuit
Surge Protection
IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC61000-4-4 (EFT) 40A (5/50ns)
Self Consumption
< 3 Watt Typical
Switch Technology
Store and Forward
Protocol
CSMA/CD
Flow Control
IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate
1488000pps , 148800pps, 14880pps
Address Table
1K MAC, self-learning
Operating Temp
-30 to +70°C (-22 to 158°F)
Operating Humidity (RH)
5% - 90% (non condensing)
Storage Temperature
-40 to +85°C (-40 to +185°F)
Dimensions (LxWxH)
159 x 118 x 40mm (6.3 x 4.6 x 1.6”)
Weight
318g (11oz)
Warranty
3 Years
[ITEMPRICE]