Charge Controller with 7 Port GigE PoE Switch. Ports can be configured for
802.3at or 24V Passive PoE. Remote Monitoring and Control.
UV resistant, outdoor enclosures
from AC mains power and/or Solar
space for customer electronics
or Pole Mounting
Customer Equipment from Power Line Surges
Quality AGM Sealed Lead Acid Batteries
battery charge controller protects against overcharge and over discharge
· Wireless Base Stations and Clients
· Surveillance Cameras
· Wireless Bridge and Repeaters
· Remote Sensors
· Mission critical outdoor power
· Backup Power Systems
The UPSPro® STL48-200-600 outdoor
enclosures are designed for applications that require a flexible backup power
source in order to maintain uninterrupted service to customers. The enclosure
is powered from 120/240VAC. It is also solar ready (blocking diodes may be
required), so a solar panel can be added as an alternate power source or to
extend backup time.
Features include an advanced temperature
compensated battery charge controller with 7 Port GigE PoE switch and built-in
remote monitoring and management. The PoE switch ports can be configured as
802.3at or 24V Passive PoE. There is a configurable wire terminal aux port. The
ground mount aluminum enclosure has multiple ports for CAT5 cable, antenna
cables/connectors or other cabling. They have thermostatically controlled power
ventilation which turns on automatically when inside temperature exceeds 45C.
There is some space inside the
enclosures for customer electronics such as controllers, wireless AP or CPE
cards, sensors, inverters, etc. There is a 1U rack mount feature in the
enclosure for rack mounting. Equipment runs on battery power which isolates it
from power line surges which is a main cause of outdoor equipment failure.
A typical high power wireless access
point with average power consumption of 8W will run 40 hours on a 52Ah battery
at room temperature or 28 hours at -20 deg C.