12/24V 40A MPPT Solar Charge Controller w/display, 20A Load, 100V PV, RS485
$204.95
Customize
Store Qty
648 Features
Note: Not Compatible with all LiFePO4 BMS 40A MPPT Solar Controller 99.5% MPPT Efficiency with Temperature Compensated Charging 40A Battery Charge, 20A Load Control Soft Start 30A Load Output to Power High Capacitive Loads Auto-ranging 12V, 24V, 36V, or 48V Battery Arrays Adjustable Battery Charging Current Multimode Load Operation – 4 selectable modes Included Bluetooth Interface for Monitor and Control OLED Display for high visibility in varying light conditions Fanless Design TVS Lightning Protection Industrial Temperature Range Low Self-Consumption <1.2W
Applications
Remote Power Systems Solar Lighting Solar Power Applications Telecom Power Applications Short Description
12/24V 40A MPPT Solar Charge Controller w/display, 20A Load, 100V PV, RS485 Long Description
The Tycon Solar® TS-SC24-40N-MPPT and TS-SC24-60N-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers with included Bluetooth interface. The battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Sealed (AGM), GEL, Flooded, and Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral OLED Blue display that shows PV Volts, Battery Volts/Current/Watts/Temperature, Load Amps/Watts. The display also shows charge state. The display dims automatically to save power. They have multiple load operating modes which can be set through the Mobile or PC app. On/Off Manual Mode, PV Voltage Control Mode, Dual-Time Control Mode, PV + Time Control Mode. Load modes are not settable through the front panel. Default is ON/Off Manual Mode. The 20A or 30A load output has a soft start feature so it can smoothly and reliably power up high capacitance loads. The load can be turned on/off from the front panel or via the PC or Mobile Apps. They have full electronic protections for short circuit, reverse current, over-power, over-voltage, over-charge, over-discharge and over-temperature. The built-in over-discharge protection and low self-consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. All protections are auto-recovery. The units are protected against lightning strikes with TVS diode protection. They operate over a wide industrial temperature range. Connections are via 6 screw terminals for wire size up to 4AWG. The controllers are internally fused for protection, but we recommend always using a 63A to 100A external fuse or circuit breaker between the controller and the battery. There are four 3mm threaded holes for mounting permanently to a flat plate. There are also brackets included for mounting to a wall or DIN rail using the Tycon #DIN-CLIPKIT-UNI DIN rail adapter bracket kit. The MPPT controllers can be connected via the RS485 interface for parallel operations, feeding multiple solar arrays into a single battery bank. Technical Links
Spec Sheet https://www.tyconsystems.com/specsheets/TS-SC24-40N-60N-MPPT%20Solar%20Charge%20Controller%20Spec%20Sheet.pdf User Guide https://www.tyconsystems.com/usermanuals/TYCON%20MPPT%20User%20Manual%20V1.0.pdf MODBUS Protocol https://www.tyconsystems.com/usermanuals/modbusprotocols/30N-60N-60P_Modbus_Communication_Prototcol_V14.pdf MG PC Software https://tsi.tyconsystems.com/Assets/Software/MyGreenSolarMonitor_Install-PC.zip SM Android App https://play.google.com/store/apps/details?id=com.smart.ipande2020&hl=en_US&gl=US&pli=1 SM iOS App https://apps.apple.com/us/app/solarmate/id1530762477 KnowledgeBase
https://tyconsystemsinc.zohodesk.com/portal/en/kb/solar-charge-controllers 