Tycon Systems
0
0

UPL12-100L-600

UPSPro 12V 100Ah 1200Wh Outdoor Lithium Backup Power System, 12V Out, 60A MPPT Chrg Ctrl w/Status Disp/30A Ld Ctrl, 120/240VAC In 63V 600W Batt Chrg, 2-4"Pole/Wall Mt AL Lock Encl
$2,030.95
Customize
Store Qty
0
Features
Solar Ready™ Weatherproof, UV resistant, outdoor enclosures Powered from AC mains power and/or Solar LFP (LiFePO4) Lithium Batteries Isolates Customer Equipment from Power Line Surges Interior space for customer electronics Wall or Pole Mounting
Applications
Wireless Base Stations and Clients Wireless Bridge and Repeaters Mission critical outdoor power Surveillance Cameras Remote Sensors Backup Power Systems
Short Description
UPSPro® 12V 100Ah 1200Wh Outdoor Lithium Backup Power System, 12V Out, 60A MPPT Chrg Ctrl w/Status Disp/30A Ld Ctrl, 120/240VAC In 63V 600W Batt Chrg, 2-4"Pole/Wall Mt AL Lock Encl
Long Description
The UPSPro® 600W Lithium series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered from 120/240VAC. It is also solar ready (blocking diodes may be required), so a solar panel can be added as an alternate power source or to extend backup time. Features include an advanced MPPT solar battery charge controller with LCD display to provide system information, LVD load control and solar charging capability. The LFP (LiFePO4) Lithium batteries have an embedded BMS (Battery Management System) to maintain proper charging of the Lithium batteries to achieve 4000+ cycle life at 80% discharge. Expected battery life is 10+ years. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. There is some space inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, etc. Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure. Multiple configurations are available for 12V or 24V systems with various battery storage capacities. A typical PTZ camera with average power consumption of 20W will run 48 hours on a 100Ah battery.
Technical Links
Spec Sheet https://www.tyconsystems.com//specsheets/UPSPro_600W_Lithium_Series_Spec_Sheet.pdf User Guide https://www.tyconsystems.com/usermanuals/8000098_UPSPro-UPS-UPL-600_quick_install_guide.pdf
KnowledgeBase
https://tyconsystemsinc.zohodesk.com/portal/en/kb/upspro
Specifications
Systems Configuration
  • Enclosure Type
    :
    Aluminum
  • Solar Charge Controller Type
    :
    MPPT
  • Battery Type
    :
    LiFePO4 Lithium (LFP)
  • System Voltage
    :
    12V
Ratings And Reviews
Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.